BIQU 3D Printer Parts MKS SGEN V1.0 Smoothieboard 32Bit Controller Board Open Source Smoothieware MKS SBASE Upgraded Supports A4988/DRV8825/LV8729/TMC2208/TMC2100 Stepper Driver
BIQU 3D Printer Parts MKS SGEN V1.0 Smoothieboard 32Bit Controller Board Open Source Smoothieware MKS SBASE Upgraded Supports A4988/DRV8825/LV8729/TMC2208/TMC2100 Stepper Driver: Industrial & Scientific. BIQU 3D Printer Parts MKS SGEN V1.0 Smoothieboard 32Bit Controller Board Open Source Smoothieware MKS SBASE Upgraded Supports A4988/DRV8825/LV8729/TMC2208/TMC2100 Stepper Driver: Industrial & Scientific. Use 32bit Cortex-M3 LPC1769 main chip, with 120MHZ main frequency . Use Open Source Smoothieware firmware . Use high quality 4-layers PCB and special design for cooling . Use special power chip that support 12V-24V power input . Support a variety of stepper drives:A4988,8825,TMC2208,TMC2100 and so on,also work with TFT series touch screen and LCD12864 . Product Description. MKS SGEN is a powerful motherboard for D printer. ,It’s based on ARM platform,uses bit Cortex-M LPC769 and runs Smoothieware firmware,which is a good choice for big and high-end printers..How to use. Step one, get the firmware:. Download the firmware on this. website:https://github.com/makerbase-mks/MKS-SGEN. Step two, upgrade the firmware:. st, copy the programme to the TF card, including:. .Firmware.bin. .Config.txt. Note that it’s all to change the file name.. nd, plug the TF card to the slot, power again, the new firmware will upgrade automatically. When successfully upgrades, the file name is change to firmware.cur.. nd, After upgrading the firmware for a while,D D and D7 on the upper left corner of the board will be always on, D and D will blink.. Step three, install the driver:. st, Extra the driver file named smoothieware-windows-signeddriver-v.0, plug the USB cable to the USB port, then enter the Device Manager.. nd, Update Driver Software.. rd, Successfully installed.. Finally, If you need more information, Please don't hesitate to contact us ). . . .
